- Download Samsung drivers
- Download N910CXXU1BOB4 firmware (Android 5.0.1) for the Galaxy Note 4 SM-N910C
- Download Odin v3.09
- Charge your battery to at least 80 percent
- Enable USB Debugging in Settings > Developer Options (in case you need to troubleshoot later)
- Backup your essential data for safe keeping
Install Lollipop on Galaxy Note 4 SM-N910C instructions
1. Unzip the firmware zip file that you downloaded on your computer.
2. Launch Odin.
3. Turn off your Note 4 and re-start in download mode (press Volume Down + Power + Home button).
4. Connect your Galaxy Note 4 via USB cable to your computer and wait for Odin to recognize it (a blue box should appear in ID:COM).
5. Make sure only Auto-Reboot and F.Reset Time are checked in Odin.
6. Make sure Re-Partition IS NOT CHECKED.
7. Click the AP button and locate the tar.md5 file in the unzipped firmware file, then click Start.
8. Wait patiently until the procedure ends and do not disconnect your Note 4. It may take a while.
9. You should see a green PASS message when successful.
10. Once your Galaxy Note 4 restarts, you should be running Android 5.0.1 Lollipop.
Credit: www.sammobile.com
Samsung Russia is reported to have started seeding the official Android 5.0.1 Lollipop
update for the Exynos 5 octa-core running Galaxy S4 (GT-I9500).
update for the Exynos 5 octa-core running Galaxy S4 (GT-I9500).
Weighing in at 1049MB, the update seems to be so big that Samsung will be removing
some pre-loaded apps like Google Play Books, Movies and others to make space.
However, these apps can be directly downloaded from Play Store.
some pre-loaded apps like Google Play Books, Movies and others to make space.
However, these apps can be directly downloaded from Play Store.
Galaxy S4 users in Russia should receive the OTA notification. The update is still
unavailable on the Kies server.
unavailable on the Kies server.
Meanwhile, recognised XDA contributor, AL_IRAQI has managed to capture the official
update and has shared the download link for the Russian Lollipop firmware. This Android
Lollipop firmware with build I9500XXUHOA7 can be flashed using the Odin flashing tool.
update and has shared the download link for the Russian Lollipop firmware. This Android
Lollipop firmware with build I9500XXUHOA7 can be flashed using the Odin flashing tool.
.jpg)
If you are interested in installing the Android 5.0.1 I9500XXUHOA7 Lollipop official
firmware on your Galaxy S4 head over to the installation guide below.
firmware on your Galaxy S4 head over to the installation guide below.
Pre-requisites
- Install proper USB drivers for your Galaxy S4 on the computer.
- Create a backup of all the data of the phone using any custom recovery.
- Enable USB Debugging Mode on phone to connect it with the computer and use Android SDK with it. [Navigate to Settings>> Developer Options>> check the USB Debugging option.]
- Your Galaxy S4 should have above 80% battery charge.
- The device should be factory unlocked.
- The phone will lose custom ROM once the stock update is installed. Also, the custom recovery will be replaced by the stock version.
- Your Galaxy S4 will no longer belong to a rooted version with the installation of official firmware.
- Android 5.0.1 Lollipop I9500XXUHOA7 works only with Galaxy S4 I9500. As flashing this on any incorrect variant might brick the device, verify the model number by navigating toSettings>> About phone>> Model number and then install firmware based on the model number.
- IBTimes UK will not be held liable for any damage to the device.
Download files:
or, from here
How to install official Android 5.0.1 Lollipop I9500XXUHOA7 update on Galaxy S4
(I9500)
(I9500)
Step-1: Extract the downloaded firmware zip using any extracting tool
Step-2: Extract the Odin zip to get Odin3 v.3.09.exe with a few other files
Step-3: Power off the Galaxy S4
Step-4: Enter into Download Mode by pressing and holding Home, Power and
Volume Down buttons together
Volume Down buttons together
Note: Ensure that you have installed the proper USB drivers installed on your PC.
Step-5: Launch Odin as Administrator on the computer. Click on the Odin tool then
right-click and select Run as Administrator from the drop down menu
right-click and select Run as Administrator from the drop down menu
Step-6: Connect the S4 to the PC using USB cable while it is in Download mode.
Wait for some time until Odin detects the device. When the phone is connected
successfully, the ID: COM box in Odin will turn light blue with the COM port number.
This step might take some time
Wait for some time until Odin detects the device. When the phone is connected
successfully, the ID: COM box in Odin will turn light blue with the COM port number.
This step might take some time
Step-7: In Odin select the files in the following order
- Tap on the BL button and select BL_I9500XXUHOA7-CL3943544_QB3767100_REV00-user_low_ship.tar.md5
- Tap on AP button and select AP_I9500XXUHOA7-CL3943544_QB3767100_REV00-user_low_ship.tar.md5
- Tap on CP button and select CP_I9500XXUHOA7-CL3943544_QB3767100_REV00-user_low_ship.tar.md5
- Tap on CSC button and select CSC_SER_I9500SERHOA7_ CL3943544_ QB3767100_REV00-user_low_ship.tar.md5
.jpg)
Step-8: Enable Auto Reboot and F.Reset Time checkboxes in Odin. Ensure Re-Partition checkbox is not checked
Step-9: Double check everything and click the Start button in Odin
Step-10: The installation should start now. It would take about five minutes to complete
the installation. Once the process is completed, the phone will restart automatically.
When you see the home screen on the phone, disconnect the phone from the computer
the installation. Once the process is completed, the phone will restart automatically.
When you see the home screen on the phone, disconnect the phone from the computer
Your Galaxy S4 should now be running I9500XXUHOA7 official build based on Android
5.0.1 Lollipop. Navigate to Settings>> About phone to verify the Android version of the
handset.
5.0.1 Lollipop. Navigate to Settings>> About phone to verify the Android version of the
handset.
[Source: XDA]
No leak firmware anymore, as Samsung officially brings out Android 5.0 Lollipop
upgrade for the Exynos 5 (octa-core) powered Galaxy Note 3 SM-N900, which runs
Android 4.3 Jelly Bean out-of-box.
upgrade for the Exynos 5 (octa-core) powered Galaxy Note 3 SM-N900, which runs
Android 4.3 Jelly Bean out-of-box.
The update is currently live for users in Russia with build version N900XXUEBOA6,
which brings all the Android Lollipop goodies such as a redesigned interface and native
apps, improved performance, heads-up and lockscreen notifications.
which brings all the Android Lollipop goodies such as a redesigned interface and native
apps, improved performance, heads-up and lockscreen notifications.
You should receive the notification for the update soon once it becomes available in your
region. To manually update your device head over to Settings>> About phone>>
Software Update. Also, keep in mind that your Note 3 is connected to a stable
Wi-Fi network.
region. To manually update your device head over to Settings>> About phone>>
Software Update. Also, keep in mind that your Note 3 is connected to a stable
Wi-Fi network.
You can also manually install N900XXUEBOA6 stock build, which is an unbranded
firmware, on your Galaxy Note 3 following our installation guide.
firmware, on your Galaxy Note 3 following our installation guide.
Firmware details
- Model name: Galaxy Note 3
- Model number: SM-N900
- Country: Russia
- Version: Android 5.0 Lollipop
- Changelist: 3779962
- Build date: 13 January
- Product code: SER
- PDA: N900XXUEBOA6
- CSC: N900SEREBOA6
- MODEM: N900XXUEBNL6
Pre-requisites
- Ensure that you have a proper USB driver for your Galaxy Note 3.
- Install USB Drivers for Galaxy S5 to connect the Android device with the computer.
- Enable USB Debugging Mode on phone to connect it with the computer and use Android SDK with it. [Navigate to Settings>> Developer Options>> check the USB Debugging option.]
- Create a backup of all the data of the phone through any custom recovery.
- The battery level of your Galaxy Note should be above 80%.
- The device should be factory unlocked.
- The phone will lose custom ROM once the stock update is installed. Also, the custom recovery will be replaced by the stock version.
- The device will no longer belong to a rooted version with the installation of official firmware.
- N900XXUEBOA6 Android 5.0 Lollipop works only with Galaxy Note 3 SM-N900. As flashing this on any incorrect variant might brick the device, verify the model number by navigating to Settings>> About phone>> Model number and then install firmware based on the model number.
- KP Phone Service will not be held liable for any damage to the device.
Download files
How to install official Android 5.0 Lollipop N900XXUEBOA6 update on
Galaxy Note 3 (SM-N900)
Galaxy Note 3 (SM-N900)
Step-1: Extract the downloaded firmware zip using any extracting tool to get a
.tar.md5 file with a few other files, which are optional
.tar.md5 file with a few other files, which are optional
Step-2: Extract the Odin zip to get Odin3 v.3.09.exe with a few other files
Step-3: Power off the Galaxy Note 3
Step-4: Put the phone into Download Mode by pressing and holding Home, Power
and Volume Down button together
and Volume Down button together
Note: Ensure that you have installed proper USB drivers installed on your PC.
Step-5: Run Odin as Administrator on the computer. For this, click on the tool then
right-click and select Run as Administrator from the drop down menu
right-click and select Run as Administrator from the drop down menu
Step-6: Connect Galaxy Note 3 to the PC using USB cable while it is in Download mode.
Wait for some time until Odin detects the device. When the phone is connected
successfully, the ID: COM box in Odin will turn light blue with the COM port number.
This step might take some time
Wait for some time until Odin detects the device. When the phone is connected
successfully, the ID: COM box in Odin will turn light blue with the COM port number.
This step might take some time
Step-7: In Odin, click AP button and select the firmware file with .tar.md5 extension
Step-8: Enable Auto Reboot and F.Reset Time checkboxes in Odin. Ensure Re-Partition checkbox is not checked
Step-9: Double check everything and click the Start button in Odin. The installation
process should begin now and take a few minutes to complete
process should begin now and take a few minutes to complete
Step-10: When the process is completed, the phone will restart automatically.
Once the home screen appears on the phone, disconnect the phone from the computer
Once the home screen appears on the phone, disconnect the phone from the computer
Your Note 3 should now be running stock firmware build N900XXUEBOA6. Navigate to Settings>> About phone to check the new Android version on your Note 3.
[Source: Sammobile]
B5330 - B5330B: Download
B5510 - B5510B - B5510L : Download
B5512 - B5512B : Download
B7510 : Download
B9062: Download
B9120: Download
B9150: Download
B9388: Download
C101: Download
C105: Download
D700 : Download
G730A: Download
G3502: Download
G3502i: Download
G3509i: Download
G3815: Download
G3818: Download
G3819D: Download
G7102: Download
Apple has released iOS 8.1.3 for the iPhone, iPad, and iPod touch. According to Apple this update addresses the following issues:
- Reduces the amount of storage space required to perform a software update
- Fixes an issue that prevented some users from entering their Apple ID password for Messages and FaceTime
- Addresses an issue that caused Spotlight to stop displaying app results
- Fixes an issue that prevented multitasking gestures from working on the iPad
- Adds new configuration options for education standardized testing
- Bug fixes, stability fixes and performance improvements.
Anything that Apple can do to make software updates smaller and easier to install will be welcomed by many. The size of the iOS 8 download made it difficult for some to apply the update without either connecting the device to a computer running iTunes or deleting apps and data. The update is available over-the-air through the Software Update section of the Settings app, and is available for the iPhone 4s onwards, iPad 2 onwards (including all iPad mini versions), and the fifth-generation iPod touch. Let's download the IOS 8.1.3 official from the link below.
IPHONE
IPOD
IPAD
IPAD MINI
Source [getios]
Samsung SM-G7102 Soft Unbrick Tested Firmware + Downgrade From 4.4.2 Guide
Note:This file Only fix Bootloop issues ,Always Booting in recovery mode, after update to 4.4.2 hang Logo Only recovery mode.
Firmware Flashing Method:
* Put Mobile in Download Mode By Holding Vol dwn + Home + Pwr
* Connect Phone to PC using USB
* Run Odin
* Select File in PDA
* Uncheck Auto Boot in Odin (Important This Step )
* Click Start
* After Flash complete Disconnect yur mobile Remove battery Wait for 20
Insert Battery Power ON your Mobile
* If downgraded From 4.4.2 Hard rest it Mobile should Boot
* After flash Hard reset it if not Booted
Note: Tested on 2 Devices Worked Fine and IMEI also fine
Source: http://forum.gsmhosting.com/vbb/f777/samsung-sm-g7102-soft-unbrick-tested-firmware-downgrade-4-4-2-guide-1881832/
- Full SELinux support: That means you can flash the rom CM 4.4, 5.0 or higher (set_metadata).
- Supports USB-OTG
- Support for MTP - can copy the data directly to your phone when you are in Recovery
- Assistance in Recovery Screenshots [holding Power + volume controls]
- Support backup IMEI (EFS)
- Supports Hard reset using hardware keys: Hold the Volume Down + Home and resources.
- Can operate on both 4.1.2 and 4.4.2 (even 5.0)
- Henceforth only use this for LG GPRO recovery, not using CWM Recovery [loki'd] more
How to Recovery:
1. Use Rebooter from CHPLay, the app or select Reboot recovery LGRecovery_GPRO_GK.apk
2. Use by going to the hardware keys: hold Volume Up + Home and Power (Do at Home and in Volume down + Power because it is hard reset will cause loss of data).
Installation instructions:
- Requires root LG GPRO
- Download APK file and install as normal and follow the instructions in the image below
- Download file: LGRecovery_GPRO_GK.apk - https://www.androidfilehost.com/?
fid=95784891001611317
- If you are in Recovery, please download this zip file https://www.androidfilehost.com/?fid=95784891001614013 , flash through the old Recovery -> Reboot recovery is'll have TWRP Recovery 2.8.1.0
