- Download Samsung drivers
- Download N910CXXU1BOB4 firmware (Android 5.0.1) for the Galaxy Note 4 SM-N910C
- Download Odin v3.09
- Charge your battery to at least 80 percent
- Enable USB Debugging in Settings > Developer Options (in case you need to troubleshoot later)
- Backup your essential data for safe keeping
Install Lollipop on Galaxy Note 4 SM-N910C instructions
1. Unzip the firmware zip file that you downloaded on your computer.
2. Launch Odin.
3. Turn off your Note 4 and re-start in download mode (press Volume Down + Power + Home button).
4. Connect your Galaxy Note 4 via USB cable to your computer and wait for Odin to recognize it (a blue box should appear in ID:COM).
5. Make sure only Auto-Reboot and F.Reset Time are checked in Odin.
6. Make sure Re-Partition IS NOT CHECKED.
7. Click the AP button and locate the tar.md5 file in the unzipped firmware file, then click Start.
8. Wait patiently until the procedure ends and do not disconnect your Note 4. It may take a while.
9. You should see a green PASS message when successful.
10. Once your Galaxy Note 4 restarts, you should be running Android 5.0.1 Lollipop.
Credit: www.sammobile.com
0 comments:
Post a Comment